|Home||» Products||» SMT Stencil Printer||» Automatic SMT 1200mm Solder paste printer for SMT assembly line|
Automatic SMT 1200mm Solder paste printer for SMT assembly line
F-1200 a high accuracy lengthen printing robot designed for screen printing or stencil printing in SMT industry.
a) Support wide spectrums of PCB size from 50mm x 50mm to 1200mm x 340mm and PCB thickness from 0.6mm to 6mm.
b) High printing resolution:
Automatic control improves production efficiency, controls quality and saves production cost:
Automatic stencil cleaning (dry-type, wet-type);
d) Adopt company independently developed suspended print head with programmable pressure adjustment. Support on-line real time pressure feedback and automatic squeegee pressure balancing.
e) Programmable motor controls separation speed and distance among squeegee, stencil and substrate, to realize multi-method separation.
f) Multi-functional PCB positioning and clamping system, for convenient fast and accurate PCB positioning.
g) Upward and downward visual positioning.
h) Built-in image processing system;
i) Support 2D, SPC functions.
Applicable pitches of Components
a) SMT Components such as resistors, capacitors, inductors, diode and triode: 0201, 0402, 0603, 0805, 1206 and other specifications.
b) IC: support SOP, TSOP, TSSOP, QFN packaging, min. pitch 0.3 mm; support BGA, CSP packaging, min. ball 0.2 mm.
c) Printing size?80mm x 50mm ~1200 mm x 340 mm;
d) PCB thickness: 0.6 mm ~ 6 mm
e) FPC thickness: less than 0.6 mm (excluding jig)
Applicable PCB Types
Applicable to PCB types of LED, mobile phone, communication, LCD TV, STB, family cinema, vehicle electronics, medical power equipment, space flight and aviation, as well as production and processing of general electronics products
* The following data is measured under environment temperature of 25 ? and humidity of 60%.
Suspended print head with programmable squeegees pressure automatic adjustment system
a) Programmable pressure automatic adjustment system ensures accurate pressure control.
b) Pressures of front and rear squeegees are separately adjusted, to compensate pressure imbalance caused by fatigue deformation of squeegee to prevent from different printing quality between front and rear squeegee.
5. PCB clamping and support system:
a) Magnetic pins
b) PCB flexible side clamping system to ensure no bending and deformation during PCB clamping
c) Strong vacuum suction optional
d) Elastic Z-direction pressing tablets optional
e) Flexible automatic pinsoptional