Yamaha YS100 Pick and Place Machine

Yamaha YS100 Pick and Place Machine
Yamaha YS100 Pick and Place Machine
Send Inquiry
Product Code : Yamaha YS100 Pick and Place Machine
Brand Name : Yamaha
Price And Quantity
  • Minimum Order Quantity
  • 1 Set
  • Price
  • 1000 USD ($)
Product Description

Yamaha YS100 Pick and Place Machine

  • Patch speed 25,000CPH
  • components range: 0402 - W45xL100mm
  • Capable 15mm height components
  • Product description: Yamaha YS100 Pick and Place Machine -Good Price! Good Quality! Good Service!
  • yamaha YS100 pick and place machine

Products Description:

Thanks to a high precision single placement beam that carries eight independent Z-servo controlled heads, the YS100 provides a perfect balance between chip and IC shooting. It is available in two versions: one with a Flying Nozzle Change (FNC) head for when many nozzle changes are needed and high output is important, the other with a Super Fine (SF) head for use with a wider component range including QFPs, connectors and tall components.

With placement rates up to 19.6k components per hour, the YS100 is fast. Placement accuracy is 30 microns for ICs. It handles a wide range of components from 0.4x0.2 mm (01005) to large connectors (100x45 mm), fine-pitch and components up to 15 mm tall. The YS100 holds up to 126 tape feeding positions.

Main benefits

  • The standard YS100 comes with software and hardware features to improve product quality, increase production efficiency, shorten NPI and changeover times and reduces maintenance, including:
  • Intelligent electrical feeders
  • Z-Servo controlled placement heads for accurate stress-free component mounting
  • Automatic board width and thickness adjustment for fast changeover
  • Automatic nozzle cleaning station
  • Automatic temperature feedback to compensate for temperature variations
  • Fiducial recovery function that eliminates the need to remove and clean the PCB
  • Feeder indicators that facilitate easy setup and reduce feeder setup
  • Double board support system for reducing board transfer time
  • Tape cutters
High-speed mounting capacity handling
  • 25,000CPH(0.14sec/CHIP Equivalent : optimum condition)
  • 50m(CHIP),
  • 30m(QFP)mounting
  • absolute accuracy in full time operation
  • Handles a wide range of components from 0402 chips to W45xL100mm or less components and with long connectors
  • Capable of handling 15mm height components
  • Applicable to large size PCB(L510mm x W460mm)
  • Built-in tape cutter available as an option
  • Conformity with both Machinery directive and EMC directive
Trade Information
  • Supply Ability
  • 1000set Per Month
  • Delivery Time
  • 30 Days


Back to top
FLASON ELECTRONIC CO. LIMITED All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.(Terms of Use)
Developed and Managed by Infocom Network Ltd.